sakura/ToolTip1

ToolTip (1/2)

• ToolTip-ID: 10000
  [Refer to the backup folder]
  Refer to the folder that makes the backup.

• ToolTip-ID: 10010
  [making of backup]
  The backup of the file before it updates it when preserving it is made.

• ToolTip-ID: 10011
  [backup file name]
  The age is put behind the backup file name at the Christian era.

• ToolTip-ID: 10012
  [backup file name]
  The moon is put up behind the backup file name.

• ToolTip-ID: 10013
  [backup file name]
  The day is put behind the backup file name.

• ToolTip-ID: 10014
  [backup file name]
  Time is put behind the backup file name.

• ToolTip-ID: 10015
  [backup file name]
  The amount is put behind the backup file name.

• ToolTip-ID: 10016
  [backup file name]
  The second is put behind the backup file name.

• ToolTip-ID: 10017
  [Confirm it before it makes it]
  It confirms it before the backup file is made.

• ToolTip-ID: 10018
  [Make it for a specified folder]
  The backup file is made for the specified folder.
  Please set the folder name.
  It is made for the same folder as the original file when invalidating it.

• ToolTip-ID: 10019
  [The backup file is thrown in to the garbage box]
  The backup file is thrown in to the garbage box.
  When a network drive and a removable drive preserving of the backup file ahead, it doesn't throw it in to the garbage box.

• ToolTip-ID: 10040
  [preservation folder name]
  The folder name in which the backup file is preserved is specified in the full path.

• ToolTip-ID: 10041
  [number of generations]
  The preserved number of generations is specified when the extension of the file is made a sequential number and it preserves it.

• ToolTip-ID: 10060
  [kind of backup]
  The one that the extension of the file before it updates it was changed to ". bak" is preserved.

• ToolTip-ID: 10061
  [kind of backup]
  The one that the date and time were put behind the file name before it updates it is preserved.

• ToolTip-ID: 10062
  [kind of backup]
  The one that the extension of the file name before it updates it was changed to the ream turn (b99 from b00) is preserved.
  Please set the preserved number of generations.

• ToolTip-ID: 10063
  [added kind at date]
  The date in point that makes the backup file is used.

• ToolTip-ID: 10064
  [added kind at date]
  The time stamp of the date (updated day and hour of the file) when preserving it last time, that is, the file is used.

• ToolTip-ID: 10065
  [Former extension is preserved]
  It adds without deleting the extension and it preserves it.

• ToolTip-ID: 10066
  [detailed setting]
  Folder name in place where x piece moved to $x high-ranking hierarchy

Extension
Christian era of %Y (four digits)
Christian era of %y (two digits)
The %m moon
%d day
At %H
..%M..
%S second
% sign

• ToolTip-ID: 10100
  [function deletion from menu]
  The function selected from the menu is deleted.

• ToolTip-ID: 10101
  [separator insertion]
  It inserts it ahead of the line to which the separator is displayed in reverse video by the menu.

• ToolTip-ID: 10102
  [Insert it in the menu the function]
  It inserts it ahead of the line to which the function that has been selected is displayed in reverse video by the menu.

• ToolTip-ID: 10103
  [Add it to the menu the function]
  The function that has been selected is added at the end of the menu.

• ToolTip-ID: 10104
  [The function of the menu is moved on]
  The order of the function selected by the menu is moved on.

• ToolTip-ID: 10105
  [The function of the menu is moved below]
  The order of the function selected by the menu is moved below.

• ToolTip-ID: 10106
  [import]
  The set up information of the custom menu is read from the file.

• ToolTip-ID: 10107
  [export]
  The set up information of the custom menu is preserved in the file.

• ToolTip-ID: 10130
  [type of function]
  The type of the function to do the list display is selected.

• ToolTip-ID: 10131
  [type of menu]
  The type of the set menu is selected.

• ToolTip-ID: 10150
  [function list]
  It is a list of the function of the type that has been selected now it is possible to register in the custom menu.

• ToolTip-ID: 10151
  [menu list]
  It is a list of the custom menu.

• ToolTip-ID: 10210
  [Copy it putting changing line on the line by return]
  When the number of lines that exceed the turn digit number set by the setting according to the type are copied onto the clipboard, changing line is given to the turned part.

• ToolTip-ID: 10211
  [Release it the selection when copying it]
  When the range of the selection is copied, the selection is automatically released.

• ToolTip-ID: 10215
  [The line mode putting is enabled]
  It puts after it copies it in non-selective state (line copy) and, then, it becomes the line putting of interchangeable VS2003/2005.

• ToolTip-ID: 10216
  [The copy is enabled without the selection]
  When the copy operation is done in non-selective state, the entire line is copied.
  It is a line of interchangeable VS2003/2005 copy.

• ToolTip-ID: 10212
  [Drag & drop is edited]
  It is specified whether to use drag & drop.
  The drag & drop of the text can be done with other applications.

• ToolTip-ID: 10213
  [Make it to the drop origin]
  It is specified whether drug & drops from the cherry editor to other applications.

• ToolTip-ID: 10214
  [replace mode]
  Changing line at the end of line is not overwrited in the character input.

• ToolTip-ID: 10310
  [exclusive control of file (Do not control it exclusively)]
  It doesn't control it exclusively.
  When the update is effectively confirmed, the file editing it in the cherry editor can be detected being updated.

• ToolTip-ID: 10311
  [watch of update]
  It is observed whether the file is updated when the file is not exclusively controlled.

• ToolTip-ID: 10312
  [exclusive control of file (superscription prohibition)]
  The superscription from another process is prohibited.
  As for other applications or users, only the reference is possible.

• ToolTip-ID: 10313
  [exclusive control of file (reading and writing prohibition)]
  Reading and writing from another process is prohibited.
  Other applications or users become impossible the reference to the file and the update.

• ToolTip-ID: 10314
  [preservation of file]
  No change specifies whether to overwrite.

• ToolTip-ID: 10315
  [Automatically preserve it]
  The file is automatically preserved at the specified interval time.

• ToolTip-ID: 10316
  [It shuts and open]
  The file dropped after the file that is opening now is shut when the file is dropped is opened.

• ToolTip-ID: 10317
  [file opening]
  When the file is opened, the cursor position is restored.

• ToolTip-ID: 10318
  [MIME decipherment]
  The decipherment does the header to which MIME was encoded when the file is opened.

• ToolTip-ID: 10340
  [automatic saving interval]
  The interval when the file is preserved automatically is specified in each amount.

• ToolTip-ID: 10341
  [file drop maximum number]
  The maximum number of files that open by dropping the file is set.
  When the limitation is exceeded, it disregards it.

• ToolTip-ID: 10342
  [restoration of bookmark]
  The bookmark is restored.

• ToolTip-ID: 10343
  [Inquire at a character-code different from last time]
  At the character-code that the file that started opening is different from last time
  The dialog of the inquiry is displayed.

• ToolTip-ID: 10344
  [Warn when the file that started opening doesn't exist]
  When the file that started opening doesn't exist
  The dialog of warning is displayed.

• ToolTip-ID: 10345
  [When preserving it, display it from new all files]
  (untitled)
  In preservation giving the name of the document
  When the file type specifies the user
  Files other than a specified extension are displayed.

• ToolTip-ID: 10346
  [When preserving it excluding new, display it all files]
  (untitled)
  In but giving the name of the file and preserving it
  When the file type specifies the user
  Files other than a specified extension are displayed.

• ToolTip-ID: 10440
  [date format]
  When the date format is a custom, the date format is specified.

• ToolTip-ID: 10441
  [time format]
  When the date format is a custom, the time format is specified.

• ToolTip-ID: 10442
  [example of displaying date format]
  It is an example of displaying the date format.

• ToolTip-ID: 10443
  [example of displaying time format]
  It is an example of displaying the time format.

• ToolTip-ID: 10444
  [finding sign]
  When the outline is analyzed, the sign identified as finding is set.

• ToolTip-ID: 10445
  [quotation mark]
  The quotation mark put on the head of each line is set by the function of the selection range all line quotation copy.

• ToolTip-ID: 10460
  [date format]
  The date used by the insertion function of the date format is made a standard.
  The format of a form long in which it is set by the control panel is used.

• ToolTip-ID: 10461
  [date format]
  The date used by the insertion function of the date format is originally set.
  Please set the date format.
  Please refer to help for the format.

• ToolTip-ID: 10462
  [time format]
  The time used by the insertion function of time format is made a standard.
  The format of a form long in which it is set by the control panel is used.

• ToolTip-ID: 10463
  [time format]
  The time used by the insertion function of time format is originally set.
  Please set the time format.
  Please refer to help for the format.

• ToolTip-ID: 10500
  [The character string at the cursor position is made the retrieval character string of default]
  The character string at the cursor position becomes the retrieval character string of default when it is effective.
  The last retrieval character string becomes the retrieval character string of default when it is invalid.

• ToolTip-ID: 10514
  [regular expression library specification]
  I want to use an arbitrary file for the regular expression library.
  Passing the library file is specified.

• ToolTip-ID: 10510
  [The preservation confirmation is done by the Gre p mode]
  When the window is shut by the Gre p mode, the preservation confirmation is done.

• ToolTip-ID: 10513
  [In real time display it]
  The Grep result is in real time displayed.

• ToolTip-ID: 10511
  [Jump with 'Enter' tag]
  Tag jumps from the Grep result by 'Enter'.

• ToolTip-ID: 10512
  [Jump by double-clicking tag]
  Tag jumps from the Grep result by double-clicking.

• ToolTip-ID: 10602
  [Refer to an external Help file]
  Refer to an external Help file.

• ToolTip-ID: 10603
  [Refer to external HTML file]
  Refer to external HTML Help file.

• ToolTip-ID: 11611
  [font of key word help]
  The font of key word help is specified.

• ToolTip-ID: 10610
  [one by one input supplementation]
  It is specified whether to one by one do the input supplementation.

• ToolTip-ID: 10612
  [candidate decision key]
  It decides it with 'Enter' of the candidate.

• ToolTip-ID: 10613
  [candidate decision key]
  It decides it with the Tab key of the candidate.

• ToolTip-ID: 10614
  [candidate decision key]
  It decides it with → key of the candidate.

• ToolTip-ID: 10615
  [candidate decision key]
  It decides it with the Space key of the candidate.

• ToolTip-ID: 10617
  [two or more of viewer starts]
  Two or more external HTML help is not started.

• ToolTip-ID: 10618
  [caret positional word retrieval]
  Even if the range is being selected, the word at the caret position is retrieved in the dictionary.

• ToolTip-ID: 10642
  [External Help File]
  The external Help file name is specified by the relative path from the full path editor.

• ToolTip-ID: 10643
  [External HTML Help File]
  External HTML Help file name is specified by the relative path from the full path editor.

• ToolTip-ID: 10650
  [Migemo DLL Filename]
  Passing migemo.dll is specified.

• ToolTip-ID: 10651
  [Refer to the Migemo DLL file]
  Refer to passing migemo.dll.

• ToolTip-ID: 10652
  [Migemo Dictionary Filename]
  Passing the dict directory is specified.

• ToolTip-ID: 10653
  [Refer to the Migemo dictionary file]
  Refer to passing the dict directory.

• ToolTip-ID: 10700
  [Import]
  The set up information of the key allocation is read from the file.

• ToolTip-ID: 10701
  [Export]
  The set up information of the key allocation is preserved in the file.

• ToolTip-ID: 10702
  [The key is allocated]
  The key is allocated in the function.

• ToolTip-ID: 10703
  [Release Key]
  The key allocated in the function is released.

• ToolTip-ID: 10710
  [Shift Key]
  The Shift key is specified for a key pushed at the same time.

• ToolTip-ID: 10711
  [Ctrl Key]
  The Ctrl key is specified for a key pushed at the same time.

• ToolTip-ID: 10712
  [Alt Key]
  The Alt key is specified for a key pushed at the same time.

• ToolTip-ID: 10730
  [Function Type]
  The type of the function to do the list display is selected.

• ToolTip-ID: 10740
  [function allocated in key]
  It is a function allocated in the key that has been selected.

• ToolTip-ID: 10750
  [Function List]
  It is a list of the function of the type that has been selected now it is possible to register in the key allocation.

• ToolTip-ID: 10751
  [Key List]
  It is a list of the key.

• ToolTip-ID: 10752
  [key allocated in function]
  It is a key allocated in the function that has been selected.

• ToolTip-ID: 10800
  [Add Keyword Set]
  A new key word set is added.

• ToolTip-ID: 10801
  [Delete Keyword Set]
  The key word set that has been selected is deleted.

• ToolTip-ID: 10802
  [Add Keyword]
  A new key word is added to the key word list.

• ToolTip-ID: 10803
  [Edit Keyword]
  The key word that has been selected is edited.

• ToolTip-ID: 10804
  [Delete Keyword]
  The key word that has been selected is deleted from the key word list.

• ToolTip-ID: 10805
  [Import]
  The set up information of the key word is read from the file.

• ToolTip-ID: 10806
  [Export]
  The set up information of the key word is preserved in the file.

• ToolTip-ID: 10807
  [Keyword Arrangement]
  The key word that cannot be used as an emphasis key word is deleted.

• ToolTip-ID: 10810
  [distinction of small letter of English capital letter of key word]
  It is specified whether to distinguish the English capital letter and the small letter of the key word.

• ToolTip-ID: 10830
  [emphasis key word set name]
  The set name of the emphasis key word is specified.

• ToolTip-ID: 10831
  [change of name of set]
  The set name of the emphasis key word is changed.

• ToolTip-ID: 10840
  [Keyword List]
  It is a list of the key word registered in the key word set that has been selected.

• ToolTip-ID: 10900
  [Clear History (File)]
  The history of the file used recently is cleared.

• ToolTip-ID: 10901
  [The history is clear (folder)]
  The history of the folder used recently is cleared.

• ToolTip-ID: 10910
  [Free Cursor]
  It makes it to the free cursor mode.
  The caret can be moved from the changing line sign to the right side by changing to this mode.

• ToolTip-ID: 10911
  [Auto Indent]
  An automatic indent does.

• ToolTip-ID: 10912
  [The em-size blank is an indent]
  When the automatic indenting and the head of line move, the em-size blank is taken care of as an indent character.

• ToolTip-ID: 10913
  [Use Task Tray]
  The icon is stored in the task tray.

• ToolTip-ID: 10914
  [Reside in the task tray]
  It resides in the task tray.
  Even if all the edit windows are shut, the icon remains in the task tray.

• ToolTip-ID: 10915
  [Reed Little]
  The scroll is reeded a little.

• ToolTip-ID: 11752
  [Use Screen Cash]
  CPU load when the screen doesn't scroll to a cursor movement etc. alone falls.

• ToolTip-ID: 10916
  [Confirm End]
  The end of the editor is confirmed.

• ToolTip-ID: 10917
  [Stop at both ends of the word when wording moving]
  The caret stops at both ends of the word when wording moving.

• ToolTip-ID: 1072
  [The cursor is not moved in making actively by the mouse click]
  In the mouse click when it is non-active, the window is made active.
  It drinks, and the cursor position is not moved.

• ToolTip-ID: 10918
  [Stop at both ends of the paragraph when paragraphing moving]
  The caret stops at both ends of the paragraph when paragraphing moving.

• ToolTip-ID: 10919
  [confirmation when two or more windows are shut at the same time]
  It confirms before it shuts by various operation that shuts bringing two or more windows together.

• ToolTip-ID: 10940
  [shortcut key of left-click menu]
  The shortcut key that calls the left-click menu of the task tray is set.

• ToolTip-ID: 10941
  [scroll the number of lines]
  When scrolling with a top and bottom usually key, the number of lines that scroll at a time are set.

• ToolTip-ID: 10942
  [Max File History]
  The maximum number of histories of the file used recently is set.

• ToolTip-ID: 10943
  [Max Folder History]
  The maximum number of histories of the folder used recently is set.

• ToolTip-ID: 10960
  [Cursor Shape (Windows Style)]
  The cursor shape is made in the Windows style.
  It becomes a rectangle as big as one character in insert mode ..thin vertical line.. in overwrite mode.

• ToolTip-ID: 10961
  [Cursor Shape (MS-DOS Style)]
  The cursor shape is made in the MS-DOS style.
  Height..half..rectangle..as big as ..rectangle..become.

• ToolTip-ID: 11000
  [Delete Function from Toolbar]
  The function selected from the toolbar is deleted.

• ToolTip-ID: 11001
  [Insert Separator]
  The separator is inserted in the toolbar.

• ToolTip-ID: 11002
  [Insert it in the toolbar the function]
  The function that has been selected is inserted in the toolbar.

• ToolTip-ID: 11003
  [Add it to the toolbar the function]
  The function that has been selected is added at the end of the toolbar.

• ToolTip-ID: 11004
  [The function of the toolbar is moved on]
  The order of the function that the toolbar selected is moved on.

• ToolTip-ID: 11005
  [The function of the toolbar is moved below]
  The order of the function that the toolbar selected is moved below.

• ToolTip-ID: 11010
  [Flat Button]
  Buttons on the toolbar are made flat.

• ToolTip-ID: 11030
  [Function Type]
  The type of the function to do the list display is selected.

• ToolTip-ID: 11040
  [Function List]
  It is a list of the function of the type that has been selected now it is possible to register in the toolbar.

• ToolTip-ID: 11041
  [Toolbar List]
  It is a toolbar list.

• ToolTip-ID: 11042
  [..toolbar.. turn]
  The added positional [dede] toolbar is turned and displayed.

• ToolTip-ID: 11110
  [Clickable URL]
  When URL is clicked, the entire URL is made a selective state.

• ToolTip-ID: 11210
  [function key]
  It is set whether to display the function key in the window.

• ToolTip-ID: 11211
  [status bar]
  It is set whether to display the status bar in the window.

• ToolTip-ID: 11212
  [toolbar display]
  It is set whether to display the toolbar in the window.

• ToolTip-ID: 11213
  [horizontal scroll bar]
  The horizontal scroll bar is displayed in the window.

• ToolTip-ID: 11214
  [menu with icon]
  The icon is displayed in the menu putting it.

• ToolTip-ID: 11215
  [succession of size of window]
  The size of the window in which the size was changed at the end is preserved, and it reflects it in the size of the window after that.
  Dress is changed for the season to the setting of the position and the size.
  (since sakura:1.4.7.0)

• ToolTip-ID: 11216
  [The synchronization of the vertical scroll is taken]
  The division pane when dividing right and left scrolls to the vertical direction simultaneously.

• ToolTip-ID: 11217
  [The synchronization of the horizontal scroll is taken]
  The division pane when dividing up and down scrolls horizontally simultaneously.

• ToolTip-ID: 11218
  [tab display]
  It is set whether to display the tab in the window.

• ToolTip-ID: 11219
  [making to group]
  When you display the tab in the window
  The window is collectively made a group.

• ToolTip-ID: 11220
  [title bar when it is active]
  Information displayed in the title bar for active the window is set.

• ToolTip-ID: 11221
  [title bar when it is non-active]
  Information displayed in the title bar for non-active the window is set.

• ToolTip-ID: 11222
  [tab caption]
  Information displayed in the tab is set.

• ToolTip-ID: 11240
  [space between ruler and text]
  It specifies between the ruler and the text in each dots.

• ToolTip-ID: 11241
  [height of ruler]
  The height of the ruler is specified in each dot.

• ToolTip-ID: 11242
  [space between line - number and text]
  The space between the line - number and the text is specified.

• ToolTip-ID: 11260
  [function key display position]
  The function key is displayed up.

• ToolTip-ID: 11261
  [function key display position]
  The function key is displayed below.

• ToolTip-ID: 11262
  [number of function keys of group buttons]
  The number of function keys of group buttons is specified.

• ToolTip-ID: 11263
  [setting of position and size]
  A set dialog of the position and the size is displayed.

• ToolTip-ID: 11270
  [etc. width]
  All tabs are made the same width.

• ToolTip-ID: 11271
  [icon display]
  Each icon is displayed in the tab.

• ToolTip-ID: 11272
  [tab list sorting]
  When the list of the window is displayed, it is sorted by the file name.

• ToolTip-ID: 11273
  [(untitled) The document is left]
  When you shut the last file in the group in the tab mode
  (untitled)
  The document is left.

• ToolTip-ID: 11274
  [Only a present file shuts to the button that shuts the window]
  The movement of the button that shuts the window and the button that shuts the tab bar changes places.
  Invalidity is operation to which the button that shuts the window collectively shuts.
  Effective is operation to which the button that shuts the tab bar collectively shuts.

• ToolTip-ID: 11275
  [The tab is switched with the mouse wheel]
  The tab changes if the wheeling is done on the tab.

• ToolTip-ID: 11310
  [English word wrap]
  English word wrap is made effective.

• ToolTip-ID: 11311
  [insertion of SPACE]
  The space that corresponds to the width of the tab instead of the tab is inserted.

• ToolTip-ID: 11312
  [head of line [kinnotto]]
  Head of line [kinnotto] is done.
  A poor character (Specify it by the head of line [kinnotto] character) is hung on the end of line of the former line in the head of line.

• ToolTip-ID: 11313
  [[kinnotto] at the line end]
  [Kinnotto] is done at the line end.
  A poor character (Specify it by the [kinnotto] character of the line end) is driven out to the next line in the end of line.

• ToolTip-ID: 11314
  [The line-feed character is hung]
  The line-feed character that comes to the head of line is hung on the end of line of the former line.

• ToolTip-ID: 11315
  [Punctuation marks are hung]
  Punctuation marks that come to the head of line are hung on the end of line of the former line.

• ToolTip-ID: 11330
  [width of TAB]
  The width of TAB is specified.

• ToolTip-ID: 11331
  [state of ON/OFF of IME]
  It is specified whether to turn on IME when starting.

• ToolTip-ID: 11332
  [input mode of IME]
  The input mode when IME is turned on when starting is specified.

• ToolTip-ID: 11333
  [smart indent]
  A smart indent is specified.

• ToolTip-ID: 11334
  [method of analyzing outline]
  The method to analyze by the outline is specified.

• ToolTip-ID: 11340
  [name of setting]
  The name named to the setting is described.

• ToolTip-ID: 11341
  [file extension]
  The extension of the file is specified.
  When it doesn't put, and plurals are specified, the dot is delimited by the comma.

• ToolTip-ID: 11342
  [digit number by return]
  The digit number is specified by return.

• ToolTip-ID: 11343
  [interval of character]
  The interval of the character is specified in each dot.

• ToolTip-ID: 11344
  [interval of line]
  The interval of the line is specified in each dot.

• ToolTip-ID: 11345
  [other indent object characters]
  The indent object characters other than the blank and TAB are specified.

• ToolTip-ID: 11346
  [TAB display]
  The character string used to display TAB is set within the normal-width eight characters.

• ToolTip-ID: 11347
  [head of line [kinnotto] character]
  The head of line [kinnotto] character of the target for head of line [kinnotto] is specified.
  Hung punctuation marks are specified here.

• ToolTip-ID: 11348
  [[kinnotto] character of the line end]
  The [kinnotto] character of the line end of the target at the line end for [kinnotto] is specified.

• ToolTip-ID: 11350
  [arrow display]
  The arrow (→ of the width of normal-width) is drawn in the display of TAB instead of the character string.

• ToolTip-ID: 11351
  [line indent by return]
  It is a setting to display the head of line position in the turned line layout indenting.

• ToolTip-ID: 11352
  [When changing line, the trailing white space is deleted]
  It changes line after the blank is deleted when there is a trailing white space when changing line.

• ToolTip-ID: 11353
  [standard rule]
  Defined rule (C/C++, text, PL/SQL, JAVA, COBOL, Perl, assembler, and text with Visual Basic and WZ hierarchy, HTML, and TeX)
  [Nodoreka] is selected and the outline is analyzed.

• ToolTip-ID: 11354
  [Rule File]
  The outline is analyzed by using the rule file.

• ToolTip-ID: 11355
  [rule file name]
  The rule file is specified by the relative path from the full path editor.

• ToolTip-ID: 11356
  [Refer to the rule file]
  Refer to passing the rule file name.

• ToolTip-ID: 11357
  [The document icon is used]
  It changes to the one that the icon of the editor was related to the document (one displayed with the folder).

• ToolTip-ID: 11400
  [character color]
  The character color of the item has been selected by the color specification is set.

• ToolTip-ID: 11401
  [background color]
  The background color of the item has been selected by the color specification is set.

• ToolTip-ID: 11402
  [character color union]
  All the character colors are united by the character color that has been selected now.

• ToolTip-ID: 11403
  [background color union]
  All the background colors are united by the background color that has been selected now.

• ToolTip-ID: 11404
  [import]
  The color set up information is read from the file.

• ToolTip-ID: 11405
  [export]
  The color set up information is preserved in the file.

• ToolTip-ID: 11410
  [classification/display]
  It is specified whether to classify the item that has been selected (Or, display it).

• ToolTip-ID: 11411
  [bold-faced type]
  It is specified whether to make the item that has been selected a bold-faced type.

• ToolTip-ID: 11412
  [line in the under]
  It is specified whether to pull the under line to the item that has been selected.

• ToolTip-ID: 11413
  [digit]
  Line type comment 1 checks it by a fixed digit in case of effective.

• ToolTip-ID: 11414
  [digit]
  Line type comment 2 checks it by a fixed digit in case of effective.

• ToolTip-ID: 11430
  [one emphasis key word set name]
  The set name of emphasis key word 1 is specified.

• ToolTip-ID: 11431
  [two emphasis key word set name]
  The set name of emphasis key word 2 is specified.

• ToolTip-ID: 11440
  [block comment beginning]
  The beginning pattern of block comment 1 is specified.

• ToolTip-ID: 11441
  [block comment end]
  The end pattern of block comment 1 is specified.

• ToolTip-ID: 11442
  [line type comment]
  The pattern of line comment 1 is specified.

• ToolTip-ID: 11443
  [line type comment]
  The pattern of line comment 2 is specified.

• ToolTip-ID: 11444
  [digit number]
  Line comment 1 specifies the digit number by a fixed digit in case of effective.

• ToolTip-ID: 11445
  [digit number]
  Line comment 2 specifies the digit number by a fixed digit in case of effective.

• ToolTip-ID: 11446
  [..line - number district.. switch off]
  The delimiter of the line - number is specified by the normal-width one character.

• ToolTip-ID: 11447
  [block comment beginning]
  The beginning pattern of block comment 2 is specified.

• ToolTip-ID: 11448
  [block comment end]
  The end pattern of block comment 2 is specified.

• ToolTip-ID: 11449
  [line type comment]
  The pattern of line comment 3 is specified.

• ToolTip-ID: 11450
  [color specification]
  It is a list of the item that specifies the color.

• ToolTip-ID: 11451
  [digit]
  Line type comment 3 checks it by a fixed digit in case of effective.

• ToolTip-ID: 11452
  [digit number]
  Line comment 3 specifies the digit number by a fixed digit in case of effective.

• ToolTip-ID: 11460
  [character string escape (C language style)]
  The escape of the character string is shown in the C language style by \\ "\\'.

• ToolTip-ID: 11461
  [character string escape (PL/SQL style)]
  The escape of the character string is shown in the PL/SQL style by "' "'.

• ToolTip-ID: 11462
  [display of line - number (unit by return)]
  The display of the line - number is made the unit of the turn.

• ToolTip-ID: 11463
  [display of line - number (unit of changing line)]
  The display of the line - number is made the unit of changing line.

• ToolTip-ID: 11464
  [line - number district switching off (none)]
  The delimitation of the line - number is not displayed.

• ToolTip-ID: 11465
  [line - number district switching off (vertical line)]
  The delimitation of the line - number is made a vertical line.

• ToolTip-ID: 11466
  [line - number district switching off (arbitrariness)]
  The delimitation of the line - number is set to an arbitrary normal-width one character.

• ToolTip-ID: 11467
  [emphasis key word 2-10]
  Everything from the emphasis key word 1 to emphasis key word 10 can be selected.

• ToolTip-ID: 11468
  [digit specification of vertical line]
  The vertical line of the fixed number of digits is displayed.
  Format 1:
  Number of step digits (beginning digit position and end digit position)
  Format 2:
  Digit n of arbitrary 1, arbitrary digit 2, and digit arbitrary -

• ToolTip-ID: 11500
  [Refer to the input supplementation word file]
  Refer to the file of the word of the input supplementation function.

• ToolTip-ID: 11501
  [Refer to the key word Help file]
  Refer to the file of the dictionary of the key word help system.

• ToolTip-ID: 11510
  [small letter of English capital letter of input supplementation]
  The small letter of the English capital letter is identified because of the input supplementation.

• ToolTip-ID: 11511
  [key word help system]
  It is specified whether to use the key word help system.

• ToolTip-ID: 11512
  [Look for the candidate from the file while editing it]
  The English word of the file is added to the candidate list while editing it when checking it.

• ToolTip-ID: 11540
  [word file name]
  The word file name for the input supplementation is specified by the relative path from the full path or the editor.

• ToolTip-ID: 11541
  [dictionary file name]
  The name of the file of the dictionary of the key word help system is specified by the relative path from the full path or the editor.

• ToolTip-ID: 11542
  [external Help file name]
  The external Help file name is specified.

• ToolTip-ID: 11543
  [Refer to an external Help file]
  Refer to passing the external Help file name.

• ToolTip-ID: 11544
  [external HTML Help file name]
  External HTML Help file name is specified.

• ToolTip-ID: 11545
  [Refer to external HTML Help file]
  Refer to passing external HTML Help file name.

• ToolTip-ID: 11546
  [Two or more viewers are not started]
  Help of each process is opened in another window when invalidating it.

• ToolTip-ID: 11600
  [import]
  The set up information of the regular expression key word is read from the file.

• ToolTip-ID: 11601
  [export]
  The set up information of the regular expression key word is preserved in the file.

• ToolTip-ID: 11602
  [insertion]
  The key word specified by the regular expression and the color specification is inserted in the cursor position of the list.

• ToolTip-ID: 11603
  [addition]
  The key word specified by the regular expression and the color specification is added at the end of the list.

• ToolTip-ID: 11604
  [update]
  Information at the cursor position of the list is updated in the key word specified by the regular expression and the color specification.

• ToolTip-ID: 11605
  [deletion]
  The regular expression key word at the cursor position is deleted.

• ToolTip-ID: 11606
  [head]
  The key word at the cursor position is moved to the head of the list.

• ToolTip-ID: 11607
  [finality]
  The key word at the cursor position is moved to the end of the list.

• ToolTip-ID: 11608
  [Up]
  One key word at the cursor position is moved above.

• ToolTip-ID: 11609
  [under]
  One key word at the cursor position is moved to low.

• ToolTip-ID: 11610
  [The regular expression key word is used]
  It effectively classifies it according to the regular expression key word.

• ToolTip-ID: 11630
  [color specification]
  The color when matching it to the key word is specified.

• ToolTip-ID: 11640
  [regular expression]
  The regular expression key word is input.
  The key word is bundled by /-/ k.
  When the key word contains/it bundles it with m#-#k.
  Meta character
  Character class
  ()
  The pattern is made a group.
  ^ the head of line
  $the end of line

One arbitrary character except changing line

Repetition of pattern immediately before of 0 times or more
Repetition of pattern immediately before + of one time or more
?
The pattern immediately before appears 0 times or once.
|
Logical add in pattern
Please refer to "Regular expression library" for a detailed format.

• ToolTip-ID: 11650
  [key word list]
  It is a list of the registered regular expression key word.
  The priority level rises in the key word that is after the list.

• ToolTip-ID: 11670
  [regular expression library version]
  It is a regular expression library version.
  When the regular expression library is not found, the message is displayed.

• ToolTip-ID: 11700
  [reference]
  The folder where the macro is stored is specified.

• ToolTip-ID: 11701
  [setting]
  It registers at the position in which the macro specified by the macro name and the file name was specified with ID.
  If the macro name and the file name are empty, it becomes a deletion.

• ToolTip-ID: 11730
  [ID]
  The position in which the macro is registered is specified.

• ToolTip-ID: 11731
  [File]
  The file name of the macro is specified.

• ToolTip-ID: 11740
  [macro name]
  The name of the macro is specified.

• ToolTip-ID: 11741
  [macro list]
  It is a list of the registered macro.

• ToolTip-ID: 11750
  [macro folder]
  The folder where the macro is stored is specified.

• ToolTip-ID: 11751
  [Whenever the macro is executed, the file is read again]
  After the macro file corresponding to executing the macro is read, it executes it.

• ToolTip-ID: 11800
  [retrieval in the under]
  It retrieves it from the cursor position below.

• ToolTip-ID: 11801
  [retrieval]
  It retrieves it from the cursor position for above.

• ToolTip-ID: 11802
  [Cancel]
  This dialog box is shut.

• ToolTip-ID: 11803
  [Help]
  When the explanation of this dialog box is displayed, it clicks.

• ToolTip-ID: 11804
  [Look for wording]
  It is specified whether to make each word a retrieval.

• ToolTip-ID: 11805
  [The English capital letter and the small letter are distinguished]
  It is specified whether to distinguish the English capital letter and the small letter when retrieving it.

• ToolTip-ID: 11806
  [regular expression]
  The regular expression is used for the retrieval.

• ToolTip-ID: 11807
  [When not found, the message is displayed]
  Even if a corresponding one to the condition is not found, the message is displayed.

• ToolTip-ID: 11808
  [The search dialog is automatically shut]
  After it retrieves it, this dialog is automatically shut.

• ToolTip-ID: 11809
  [condition]
  The retrieved character string is input.
  Please enclose it with" and "/"/k" when you use the regular expression.
  Please refer to "Regular expression library" for a detailed format.

• ToolTip-ID: 11810
  [regular expression version]
  It is version information on the regular expression library.

• ToolTip-ID: 11811
  [The retrieval correspondence line is marked]
  A line corresponding by the retrieval is registered in the bookmark.

• ToolTip-ID: 11812
  [re-retrieval from head (end)]
  It retrieves it from the file head (finality) again when retrieving it to the final file (head).

• ToolTip-ID: 11900
  [retrieval in the under]
  It retrieves it from the cursor position below.

• ToolTip-ID: 11901
  [retrieval]
  It retrieves it from the cursor position for above.

• ToolTip-ID: 11902
  [substitution]
  The following one agreement character string is substituted.

• ToolTip-ID: 11903
  [substitution of all]
  All corresponding character strings are substituted.

• ToolTip-ID: 11904
  [Cancel]
  This dialog box is shut.

• ToolTip-ID: 11905
  [Help]
  When the explanation of this dialog box is displayed, it clicks.

• ToolTip-ID: 11906
  [Put it from the clipboard]
  The character string after it substitutes it is made a character string that exists in the clipboard.

• ToolTip-ID: 11907
  [Look for Wording]
  It is specified whether to make each word a retrieval.

• ToolTip-ID: 11908
  [The English capital letter and the small letter are distinguished]
  It is specified whether to distinguish the English capital letter and the small letter when retrieving it.

• ToolTip-ID: 11909
  [Regular Expression]
  The regular expression is used for the retrieval.

• ToolTip-ID: 11910
  [Display Message when Not Found]
  Even if a corresponding one to the condition is not found, the message is displayed.

• ToolTip-ID: 11911
  [The substitution dialog is automatically shut]
  After it retrieves it, this dialog is automatically shut.

• ToolTip-ID: 11912
  [before it substitutes it]
  The substituted character string is input.

• ToolTip-ID: 11913
  [after it substitutes it]
  The character string after it substitutes it is input.
  After it substitutes it, the regular expression cannot be used for the character string.

• ToolTip-ID: 11914
  [substitution object (selection character)]
  The substitution object is specified.
  A corresponding character string to the character string before it substitutes it is substituted.

• ToolTip-ID: 11915
  [substitution object (selection starting point insertion)]
  The substitution object is specified.
  The character string after it substitutes it for the starting point of a corresponding character string to the character string before it substitutes it is inserted.

• ToolTip-ID: 11916
  [substitution object (selection terminal addition)]
  The substitution object is specified.
  The character string after it substitutes it for the terminal of a corresponding character string to the character string before it substitutes it is added.

• ToolTip-ID: 11917
  [range (entire file)]
  The range of substitution is specified.
  The entire file is retrieved.

• ToolTip-ID: 11918
  [range (range of selection)]
  The range of substitution is specified.
  The range of the selection is retrieved.

• ToolTip-ID: 11919
  [Regular Expression Version]
  It is version information on the regular expression library.

• ToolTip-ID: 11920
  [The retrieval correspondence line is marked]
  A line corresponding by the retrieval is registered in the bookmark.

• ToolTip-ID: 11921
  [re-retrieval from head (end)]
  It retrieves it from the file head (finality) again when retrieving it to the final file (head).

• ToolTip-ID: 11922
  ["Substitution of all" is the repetitions of substitution]
  Only when the pattern including positional specification is deleted, the result is different.

---